Xwave2 Ranger - Signal strength range finder

Xwave2 Ranger

Features

A quick and easy way to evaluate your Xwave2 wireless site:

• Assists with the pre-planning of your installation

• Helps find the ideal positioning of wireless devices

• Indicates the possibility of Xwave2 congestion

• Simple to switch off the Ranger to conserve battery life

Power LED

• will illuminate when the Ranger device has sufficient battery.

• will flash whenever it detects an unknown Xwave2 signal, indicating wireless traffic.

Signal Strength LEDs

• will display the quality of the signal between the two Ranger devices, with 1 LED indicating very poor signal and 5 LEDs indicating excellent signal

• will turn off when there is no signal between the Ranger devices.

HOW TO USE THE IDS XWAVE2 RANGER

• When the two Ranger devices are connected, they will automatically switch off to conserve power.

• The Ranger devices will automatically pair once separated.

• Position one Ranger device where you intend to install your Xwave2 Hub.

• Hold the second Ranger device at the location for your Xwave2 peripherals. Adjust the Ranger until you achieve the best signal in that area.

Tip: Hold the Ranger device by the finger grips to prevent your hands from causing interference.

Please note: The Ranger should be utilized as a guide, as results may vary significantly based on the peripherals used on-site.

Technical Specifications

Battery: 2 x AA 1.5VDC Batteries

Frequency: 869Mhz

Protocol: Xwave

Brochure

Manual

Video